This collection combines attributed Wikipedia excerpts and original SciAtlas bilingual definitions under CC BY-SA 4.0. Excerpts were extracted and shortened; machine-assisted Chinese translations are labeled. Original entries provide further reading. Language versions may differ in emphasis and do not replace standards. Concepts can appear in several disciplines; consult standards and original literature for rigorous use.
contains 206 terms · This page displays 30 terms, you can enter keywords to query the complete range
Catalysis (, kə-TAL-iss-iss) is the increase in rate of a chemical reaction due to an added substance known as a catalyst ( KAT-əl-ist). Catalysts are not consumed by the reaction and remain unchanged after the reaction. If the reaction is rapid and the catalyst is recycled quickly, a very small amount of catalyst often suffices; mixing, surface area, and temperature are important factors in reaction rate. Catalysts generally react with one or more reactants to form intermediates that subsequently give the final reaction product, in the process of regenerating the catalyst. The rate increase occurs because the catalyst allows the reaction to occur by an alternative mechanism which may be much faster than the noncatalyzed mechanism. However the noncatalyzed mechanism does remain possible, so that the total rate (catalyzed plus noncatalyzed) can only increase in the presence of the catalyst and never decrease.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
A nuclear reactor is a device used to sustain a controlled fission nuclear chain reaction. They are used for commercial electricity, marine propulsion, weapons production, and research. Fissile nuclei (primarily uranium-235 or plutonium-239) absorb single neutrons and split, releasing energy and multiple neutrons, which can induce further fission. Reactors stabilize this, regulating neutron absorbers and moderators in the core. Fuel efficiency is exceptionally high; low-enriched uranium is 120,000 times more energy-dense than coal. Heat from nuclear fission is passed to a working fluid coolant. In commercial reactors, this drives turbines and electrical generator shafts. Some reactors are used for district heating, and isotope production for medical and industrial use. After the discovery of fission in 1938, many countries launched military nuclear research programs. Early subcritical experiments probed neutronics. In 1942, the first artificial critical nuclear reactor, Chicago Pile-1, was built by the Metallurgical Laboratory.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
In physics, radiation is the emission or transmission of energy in the form of waves or particles through space or a material medium. This includes: electromagnetic radiation consisting of photons, such as radio waves, microwaves, infrared, visible light, ultraviolet, x-rays, and gamma radiation (γ) particle radiation consisting of particles of non-zero rest energy, such as alpha radiation (α), beta radiation (β), proton radiation and neutron radiation acoustic radiation, such as ultrasound, sound, and seismic waves, all dependent on a physical transmission medium gravitational radiation, in the form of gravitational waves, ripples in spacetime Radiation is often categorized as either ionizing or non-ionizing depending on the energy of the radiated particles. Ionizing radiation carries more than 10 electron volts (eV), which is enough to ionize atoms and molecules and break chemical bonds. This is an important distinction due to the large difference in harmfulness to living organisms.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
阿瑞尼斯方程(英语:Arrhenius equation)是化学反应的速率常数与温度之间的关系式,适用于基元反应和非基元反应,甚至某些非均相反应。其不定积分形式为: k = A e − E a / R T {\displaystyle \ k=Ae^{{-E_{a}}/{RT}}} 或 ln k = − E a R T + ln A {\displaystyle \ \ln k=-{\frac {E_{a}}{RT}}+\ln A} 其中: k {\displaystyle \ k} 为反应的速率常数; A {\displaystyle \ A} 称为指前因子/阿伦尼乌斯常数,单位与 k…
In physical chemistry, the Arrhenius equation is a formula for the temperature dependence of reaction rates. In 1889 while working with Wilhelm Ostwald at Leipzig University, Svante Arrhenius proposed the equation on the basis of the work of Dutch chemist Jacobus Henricus van 't Hoff, who had noted in 1884 that the Van 't Hoff equation for the temperature dependence of equilibrium constants suggests such a formula for the rates of both forward and reverse reactions. This equation has a vast and important application in determining the rate of chemical reactions and for calculation of energy of activation. Arrhenius provided a physical justification and interpretation for the formula. Currently, it is best seen as an empirical relationship. It can be used to model the temperature variation of diffusion coefficients, population of crystal vacancies, creep rates, and many other thermally induced processes and reactions. The Eyring equation, developed in 1935, also expresses the relationship between rate and energy.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
Convection is the transfer of heat through the physical movement of fluids (liquids or gases), where warmer, less-dense material rises and cooler, denser material sinks. It is a single-phase or multiphase fluid flow that occurs spontaneously through the combined effects of material property heterogeneity and body forces on a fluid. When the cause of the convection is unspecified, convection due to the effects of thermal expansion (change in density) and gravity/buoyancy can be assumed (see convection in heat transfer). Convective flow may be transient (such as when a multiphase mixture of oil and water separates) or steady state (see convection cell). The convection may be due to gravitational, electromagnetic or fictitious body forces. Heat transfer by natural convection plays a role in the structure of Earth's atmosphere, its oceans, and its mantle. Discrete convective cells in the atmosphere can be identified by clouds, with stronger convection resulting in thunderstorms. Natural convection also plays a role in stellar physics.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
A heat exchanger is a system used to transfer heat between a source and a working fluid. Heat exchangers are used in both cooling and heating processes. The fluids may be separated by a solid wall to prevent mixing or they may be in direct contact. They are widely used in space heating, refrigeration, air conditioning, power stations, chemical plants, petrochemical plants, petroleum refineries, natural-gas processing, and sewage treatment. The classic example of a heat exchanger is found in an internal combustion engine in which a circulating fluid known as engine coolant flows through radiator coils and air flows past the coils, which cools the coolant and heats the incoming air. Another example is the heat sink, which is a passive heat exchanger that transfers the heat generated by an electronic or a mechanical device to a fluid medium, often air or a liquid coolant.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
在化学动力学中,反应速率常数,又称速率常数 k或 λ是化学反应速率的量化表示方式。 对于反应物A和反应物B反应成生成物C的化学反应,反应速率可表示成此式: d [ C ] d t = k ( T ) [ A ] m [ B ] n {\displaystyle {\frac {d[C]}{dt}}=k(T)[A]^{m}[B]^{n}} k(T)是反应速率常数,会随温度改变。假设反应发生在固定容积内,[A]和[B]代表两种反应物的莫耳浓度。 指数m和n称为反应级数,取决于反应机理,可由实验测定。将m和n相加,可得到反应的总级数。
In chemical kinetics, a reaction rate constant or reaction rate coefficient ( k {\displaystyle k} ) is a proportionality constant which quantifies the rate and direction of a chemical reaction by relating it with the concentration of reactants.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
化学反应速率方程是利用反应物浓度或分压计算化学反应的反应速率的方程。对于一个化学反应 m A + n B → C {\displaystyle mA+nB\rightarrow C} ,化学反应速率方程(与复杂反应速率方程相比较)的一般形式写作: r = − 1 m d [ A ] d t = k [ A ] x [ B ] y {\displaystyle r=-{\frac {1}{m}}{\frac {d[A]}{dt}}=k\ [A]^{x}[B]^{y}} 在这个方程中, [ X ] {\displaystyle [X]} 表示一种给定的反应物 X {\displaystyle X} 的活度,单位通常为摩尔每升(mol/L),但在实际计算中有时也用浓度代替(若该反应物为气体,表示分压,单位为帕斯卡 (Pa)。
In chemistry, the rate equation (also known as the rate law or empirical differential rate equation) is an empirical differential mathematical expression for the reaction rate of a given reaction in terms of concentrations of chemical species and constant parameters (normally rate coefficients and partial orders of reaction) only.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
对数平均温差(logarithmic mean temperature difference)简称为LMTD,是在传热流体系统(例如热交换器中)用来分析温度推动力的工具。对数平均温差是在双管换热器中冷端及热端温度差的对数平均。对数平均温差越大,表示传热量越大。在分析固定流速及流体热力学性质的热交换器时,就会出现对数平均温差。
In thermal engineering, the logarithmic mean temperature difference (LMTD) is used to determine the temperature driving force for heat transfer in flow systems, most notably in heat exchangers. The LMTD is a logarithmic average of the temperature difference between the hot and cold feeds at each end of the double pipe exchanger. For a given heat exchanger with constant area and heat transfer coefficient, the larger the LMTD, the more heat is transferred. The use of the LMTD arises straightforwardly from the analysis of a heat exchanger with constant flow rate and fluid thermal properties.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
Feedback occurs when outputs of a system are routed back as inputs as part of a chain of cause and effect that forms a circuit or loop. The system can then be said to feed back into itself. The notion of cause-and-effect has to be handled carefully when applied to feedback systems: Simple causal reasoning about a feedback system is difficult because the first system influences the second and second system influences the first, leading to a circular argument. This makes reasoning based upon cause and effect tricky, and it is necessary to analyze the system as a whole. As provided by Webster, feedback in business is the transmission of evaluative or corrective information about an action, event, or process to the original or controlling source.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
Fick's laws of diffusion describe diffusion and were first posited by Adolf Fick in 1855 on the basis of largely experimental results. They can be used to solve for the diffusion coefficient, D {\displaystyle D} . Fick's first law can be used to derive his second law, which in turn is identical to the diffusion equation. Fick's first law: Movement of particles from high to low concentration (diffusive flux) is directly proportional to the particle's concentration gradient. Fick's second law: Prediction of change in concentration gradient with time due to diffusion. A diffusion process that obeys Fick's laws is called normal or Fickian diffusion; otherwise, it is called anomalous diffusion or non-Fickian diffusion.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
A pump is a device that moves fluids (liquids or gases), or sometimes slurries, by mechanical action, typically converted from electrical energy into hydraulic or pneumatic energy. Mechanical pumps serve in a wide range of applications such as pumping water from wells, aquarium filtering, pond filtering and aeration, in the car industry for water-cooling and fuel injection, in the energy industry for pumping oil and natural gas or for operating cooling towers and other components of heating, ventilation and air conditioning systems. In the medical industry, pumps are used for biochemical processes in developing and manufacturing medicine, and as artificial replacements for body parts, in particular the artificial heart and penile prosthesis. When a pump contains two or more pump mechanisms with fluid being directed to flow through them in series, it is called a multi-stage pump. Terms such as two-stage or double-stage may be used to specifically describe the number of stages. A pump that does not fit this description is simply a single-stage pump in contrast.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
In engineering, a transfer function (also known as system function or network function) of a system, sub-system, or component is a mathematical function that models the system's output for each possible input. It is widely used in electronic engineering tools like circuit simulators and control systems and in chemical reaction engineering for the study and modeling of the residence time distribution and stability of a reactor. In simple cases, this function can be represented as a two-dimensional graph of an independent scalar input versus the dependent scalar output (known as a transfer curve or characteristic curve). Transfer functions for components are used to design and analyze systems assembled from components, particularly using the block diagram technique, in electronics and control theory. Dimensions and units of the transfer function model the output response of the device for a range of possible inputs.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
A valve is a device or natural object that regulates, directs or controls the flow of a fluid (gases, liquids, fluidized solids, or slurries) by opening, closing, or partially obstructing various passageways. Valves are technically fittings, but are usually discussed as a separate category. In an open valve, fluid flows in a direction from higher pressure to lower pressure. The word is derived from the Latin valva, which describes the moving part of a door, in turn from volvere, which means to turn or roll. The simplest, and very ancient, valve is simply a freely hinged flap which swings down to obstruct fluid (gas or liquid) flow in one direction, but is pushed up by the flow itself when the flow is moving in the opposite direction. This is called a check valve, as it prevents or "checks" the flow in one direction. Modern control valves may regulate pressure or flow downstream and operate on sophisticated automation systems.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
普兰特数(英语:Prandtl number,缩写: P r {\displaystyle \mathrm {Pr} } ) ,是一个流体力学无因次的标量,以德国力学家路德维希·普朗特的名字命名,表示动黏滞系数和热扩散率的比例,也可以视为动量传输及热量传输速率的比例。
The Prandtl number (Pr) is a dimensionless number, named for the German fluid dynamicist Ludwig Prandtl. It is defined as the ratio of momentum diffusivity to thermal diffusivity.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
努塞尔特数是流体力学中的无因次参数,以德国物理学家威廉·努塞尔特(Wilhelm Nusselt)的名字命名,其意义为流体系统的特征长度与热边界层厚度之比,计算式为: N u = h L k fluid {\displaystyle \mathrm {Nu} ={\frac {hL}{k_{\text{fluid}}}}} 其中, h {\displaystyle h} 为热对流系数 L {\displaystyle L} 为特征长度 k fluid {\displaystyle k_{\text{fluid}}} 为流体的热导率
The Nusselt number is a nondimensionalization of the convective heat transfer coefficient. Like the heat transfer coefficient, the Nusselt number may be defined locally, at a single position on a surface, or as an average value that represents the heat flow from the entire surface. The Nusselt number is named in honor of Wilhelm Nusselt, who first identified this dimensionless group in 1915. Analytical results and empirical correlations allow the Nusselt number to be estimated in many situations. For forced convection, these expressions depend on the Reynolds number and the Prandtl number. For natural convection (or "free" convection) the predictions use the Grashof number or Rayleigh number along with the Prandtl number. The mass transfer analog of the Nusselt number is the Sherwood number.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
PID控制器(比例-积分-微分控制器),由比例单元(Proportional)、积分单元(Integral)和微分单元(Derivative)组成。可以透过调整这三个单元的增益 K p {\displaystyle K_{p}} , K i {\displaystyle K_{i}} 和 K d {\displaystyle K_{d}} 来调定其特性。PID控制器主要适用于基本上线性,且动态特性不随时间变化的系统。 PID控制器是一个在工业控制应用中常见的回授回路部件。这个控制器把收集到的数据和一个参考值进行比较,然后把这个差别用于计算新的输入值,这个新的输入值的目的是可以让系统的数据达到或者保持在参考值。PID控制器可以根据历史数据和差别的出现率来调整输入值,使系统更加准确而稳定。 PID控制器的比例单元(P)、积分单元(I)和微分单元(D)分别对应目前误差、过去累计误差及未来误差。若是不知道受控系统的特性,一般认为PID控制器是最适用的控制器。借由调整PID控制器的三个参数,可以调整控制系统,设法满足设计需求。控制器的响应可以用控制器对误差的反应快慢、控制器过冲的程度及系统震荡的程度来表示。不过使用PID控制器不一定保证可达到系统的最佳控制,也不保证系统稳定性。 有些应用只需要PID控制器的部分单元,可以将不需要单元的参数设为零即可。因此PID控制器可以变成PI控制器、PD控制器、P控制器或I控制器。其中又以PI控制器比较常用,因为D控制器对回授噪声十分敏感,而若没有I控制器的话,系统不会回到参考值,会存在一个误差量。
A proportional–integral–derivative (PID) controller, or three-term controller, is a feedback-based control loop mechanism commonly used to manage machines and processes that require continuous control and automatic adjustment. It is typically used in industrial control systems and various other applications where constant control through modulation is necessary without human intervention. The PID controller automatically compares the desired target value (setpoint or SP) with the actual value of the system (process variable or PV). The difference between these two values is called the error value, denoted as e ( t ) {\displaystyle e(t)} . It then applies corrective actions automatically to bring the PV to the same value as the SP using three methods: The proportional (P) component responds to the current error value by producing an output that is directly proportional to the magnitude of the error. This provides immediate correction based on how far the system is from the desired setpoint.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
In physics and fluid mechanics, a boundary layer is the thin layer of fluid in the immediate vicinity of a bounding surface formed by the fluid flowing along the surface. The fluid's interaction with the wall induces a no-slip boundary condition (zero velocity at the wall). The flow velocity then monotonically increases above the surface until it returns to the bulk flow velocity. The thin layer consisting of fluid whose velocity has not yet returned to the bulk flow velocity is called the velocity boundary layer. The air next to a human is heated, resulting in gravity-induced convective airflow, which results in both a velocity and thermal boundary layer. A breeze disrupts the boundary layer, and hair and clothing protect it, making the human feel cooler or warmer. On an aircraft wing, the velocity boundary layer is the part of the flow close to the wing, where viscous forces distort the surrounding non-viscous flow. In the Earth's atmosphere, the atmospheric boundary layer is the air layer (~ 1 km) near the ground.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
舍伍德数是流体力学中的无量纲数,也被称为质量传递努塞尔特数,指动量与扩散传质系数之比,计算式为: S h = h D L D f l u i d {\displaystyle \mathrm {Sh} ={\frac {h_{D}L}{D_{fluid}}}} 其中, h D {\displaystyle h_{D}} 为质量传递系数 L {\displaystyle L} 为特征长度 D f l u i d {\displaystyle D_{fluid}} 为扩散传质系数
The Sherwood number (Sh) (also called the mass transfer Nusselt number) is a dimensionless number used in mass-transfer operation. It represents the ratio of the total mass transfer rate (convection + diffusion) to the rate of diffusive mass transport, and is named in honor of Thomas Kilgore Sherwood.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
A compressor is a mechanical device that increases the pressure of a gas by reducing its volume. An air compressor is a specific type of gas compressor. Many compressors can be staged, that is, the gas is compressed several times in steps or stages, to increase discharge pressure. Often, the second stage is physically smaller than the primary stage, to accommodate the already compressed gas without reducing its pressure. Each stage further compresses the gas and increases its pressure and also temperature (if inter cooling between stages is not used).
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
Industrial process control (IPC) or simply process control is a system used in modern manufacturing which uses the principles of control theory and physical industrial control systems to monitor, control and optimize continuous industrial production processes using control algorithms. This ensures that the industrial machines run smoothly and safely in factories and efficiently use energy to transform raw materials into high-quality finished products with reliable consistency while reducing energy waste and economic costs, something which could not be achieved purely by human manual control. In IPC, control theory provides the theoretical framework to understand system dynamics, predict outcomes and design control strategies to ensure predetermined objectives, utilizing concepts like feedback loops, stability analysis and controller design. On the other hand, the physical apparatus of IPC, based on automation technologies, consists of several components.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
Pressure drop (often abbreviated as "dP" or "ΔP") is defined as the difference in total pressure between two points of a fluid carrying network. A pressure drop occurs when frictional forces, caused by the resistance to flow, act on a fluid as it flows through a conduit (such as a channel, pipe, or tube). This friction converts some of the fluid's hydraulic energy to thermal energy (i.e., internal energy). Since the thermal energy cannot be converted back to hydraulic energy, the fluid experiences a drop in pressure, as is required by conservation of energy. The main determinants of resistance to fluid flow are fluid velocity through the pipe and fluid viscosity. Pressure drop increases proportionally to the frictional shear forces within the piping network. A piping network containing a high relative roughness rating as well as many pipe fittings and joints, tube convergence, divergence, turns, surface roughness, and other physical properties will affect the pressure drop.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
In fluid mechanics, pipe flow is a type of fluid flow within a closed conduit, such as a pipe, duct or tube. It is also called as Internal flow. The other type of flow within a conduit is open channel flow. These two types of flow are similar in many ways, but differ in one important aspect. Pipe flow does not have a free surface which is found in open-channel flow. Pipe flow, being confined within closed conduit, does not exert direct atmospheric pressure, but does exert hydraulic pressure on the conduit. Not all flow within a closed conduit is considered pipe flow. Storm sewers are closed conduits but usually maintain a free surface and therefore are considered open-channel flow. The exception to this is when a storm sewer operates at full capacity, and then can become pipe flow. Energy in pipe flow is expressed as head and is defined by the Bernoulli equation. In order to conceptualize head along the course of flow within a pipe, diagrams often contain a hydraulic grade line (HGL).
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
在流体力学中,雷诺数(英语:Reynolds number)是流体的惯性力 ρ v 2 L {\displaystyle {\frac {\rho v^{2}}{L}}} 与黏性力 μ v L 2 {\displaystyle {\frac {\mu v}{L^{2}}}} 的比值,它是一个无量纲量。 雷诺数较小时,黏滞力对流场的影响大于惯性力,流场中流速的扰动会因黏滞力而衰减,流体流动稳定,为层流;反之,若雷诺数较大时,惯性力对流场的影响大于黏滞力,流体流动较不稳定,流速的微小变化容易发展、增强,形成紊乱、不规则的紊流流场。
In fluid dynamics, the Reynolds number (Re) is a dimensionless quantity that helps predict fluid flow patterns in different situations by measuring the ratio between inertial and viscous forces. At low Reynolds numbers, flows tend to be dominated by laminar (sheet-like) flow, while at high Reynolds numbers, flows tend to be turbulent. The turbulence results from differences in the fluid's speed and direction, which may sometimes intersect or even move counter to the overall direction of the flow (eddy currents). These eddy currents begin to churn the flow, using up energy in the process, which for liquids increases the chances of cavitation. The Reynolds number has wide applications, ranging from liquid flow in a pipe to the passage of air over an aircraft wing. It is used to predict the transition from laminar to turbulent flow and is used in the scaling of similar but different-sized flow situations, such as between an aircraft model in a wind tunnel and the full-size version.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
A simulation is an imitative representation of a process or system that could exist in the real world. In this broad sense, simulation can often be used interchangeably with model. Sometimes a clear distinction between the two terms is made, in which simulations require the use of models; the model represents the key characteristics or behaviors of the selected system or process, whereas the simulation represents the evolution of the model over time. Another way to distinguish between the terms is to define simulation as experimentation with the help of a model. This definition includes time-independent simulations. Often, computers are used to execute the simulation. Simulation is used in many contexts, such as simulation of technology for performance tuning or optimizing, safety engineering, testing, training, education, and video games. Simulation is also used with scientific modelling of natural systems or human systems to gain insight into their functioning, as in economics. Simulation can be used to show the eventual real effects of alternative conditions and courses of action.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
Instrumentation () is a collective term for measuring instruments, used for indicating, measuring, and recording physical quantities. It is also a field of study about the art and science about making measurement instruments, involving the related areas of metrology, automation, and control theory. The term has its origins in the art and science of scientific instrument-making. Instrumentation can refer to devices as simple as direct-reading thermometers, or as complex as multi-sensor components of industrial control systems. Instruments can be found in laboratories, refineries, factories and vehicles, as well as in everyday household use (e.g., smoke detectors and thermostats).
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
In measurement technology and metrology, calibration is the comparison of measurement values delivered by a device under test with those of a calibration standard of known accuracy. Such a standard could be another measurement device of known accuracy, a device generating the quantity to be measured such as a voltage, a sound tone, or a physical artifact, such as a meter ruler. The outcome of the comparison can result in one of the following: no significant error being noted on the device under test a significant error being noted but no adjustment made an adjustment made to correct the error to an acceptable level Strictly speaking, the term "calibration" means just the act of comparison and does not include any subsequent adjustment. The calibration standard is normally traceable to a national or international standard held by a metrology body.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
A sensor is often defined as a device that receives and responds to a signal or stimulus. The stimulus is the quantity, property, or condition that is sensed and converted into electrical signal. In the broadest definition, a sensor is a device, module, machine, or subsystem that detects events or changes in its environment and sends the information to other electronics, frequently a computer processor. Sensors like PIR sensor or touch sensor are used in everyday objects such as touch-sensitive elevator buttons (tactile sensor) and lamps which dim or brighten by touching the base, and in innumerable applications of which most people are never aware. With advances in micromachinery and easy-to-use microcontroller platforms, the uses of sensors have expanded beyond the traditional fields of temperature, pressure and flow measurement, for example into MARG sensors. Analog sensors such as potentiometers and force-sensing resistors are still widely used.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
A safety valve is a valve that acts as a fail-safe. An example of safety valve is a pressure relief valve (PRV), which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits. Pilot-operated relief valves are a specialized type of pressure safety valve. A leak tight, lower cost, single emergency use option is a rupture disk. Safety valves were first developed for use on steam boilers during the Industrial Revolution. Early boilers operating without them were prone to explosion unless carefully operated. Vacuum safety valves (or combined pressure/vacuum safety valves) are used to prevent a tank from collapsing while it is being emptied, or when cold rinse water is used after hot CIP (clean-in-place) or SIP (sterilization-in-place) procedures. When sizing a vacuum safety valve, the calculation method is not defined in any norm, particularly in the hot CIP / cold water scenario, but some manufacturers have developed sizing simulations. The term safety valve is also used metaphorically.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
Life cycle assessment (LCA), also known as life cycle analysis, is methodology for assessing the impacts associated with all the stages of the life cycle of a commercial product, process, or service. For instance, in the case of a manufactured product, environmental impacts are assessed from raw material extraction and processing (cradle), through the product's manufacture, distribution and use, to the recycling or final disposal of the materials composing it (grave). An LCA study involves a thorough inventory of the energy and materials that are required across the supply chain and value chain of a product, process or service, and calculates the corresponding emissions to the environment. LCA thus assesses cumulative potential environmental impacts. The aim is to document and improve the overall environmental profile of the product by serving as a holistic baseline upon which carbon footprints can be accurately compared. The LCA method is based on ISO 14040 (2006) and ISO 14044 (2006) standards.
Sources, licensing and use
Wikipedia contributors · Retrieved2026-10-04 · CC BY-SA 4.0. Introductions were extracted as plain text and shortened. Language versions may emphasize different aspects.For concept reference; consult the original standards for authoritative requirements.
Content license
How can this knowledge be incorporated into high-end products?
This collection combines attributed Wikipedia excerpts and original SciAtlas bilingual definitions under CC BY-SA 4.0. Excerpts were extracted and shortened; machine-assisted Chinese translations are labeled. Original entries provide further reading. Language versions may differ in emphasis and do not replace standards. Concepts can appear in several disciplines; consult standards and original literature for rigorous use.
Knowledge Snapshot: 2026-10-04. Category cross-inclusion is used for reading navigation, and the names of people, institutions and unexplained placeholders in the field are not included in the quantity.