An alloy is a mixture of chemical elements of which in most cases at least one is a metallic element, although the word is also sometimes used for mixtures of elements; herein only metallic alloys are described. Metallic alloys often have properties that differ from those of the pure elements from which they are made. The vast majority of metals used for commercial purposes are alloyed to improve their properties or behavior, such as increased strength, hardness or corrosion resistance. Metals may also be alloyed to reduce their overall cost, for instance alloys of gold and copper. In an alloy, the atoms are joined by metallic bonding rather than by covalent bonds typically found in chemical compounds. The alloy constituents are usually measured by mass percentage for practical applications, and in atomic fraction for basic science studies. Alloys are usually classified as substitutional or interstitial alloys, depending on the atomic arrangement that forms the alloy.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
A phase diagram in physical chemistry, engineering, mineralogy, and materials science is a type of chart used to show conditions (pressure, temperature, etc.) at which thermodynamically distinct phases (such as solid, liquid or gaseous states) occur and coexist at equilibrium.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
A eutectic system or eutectic mixture ( yoo-TEK-tik) is a type of a homogeneous mixture that has a melting point lower than those of the constituents. The lowest possible melting point over all of the mixing ratios of the constituents is called the eutectic temperature. On a phase diagram, the eutectic temperature is seen as the eutectic point (see plot). Non-eutectic mixture ratios have different melting temperatures for their different constituents, since one component's lattice will melt at a lower temperature than the other's. Conversely, as a non-eutectic mixture cools down, each of its components solidifies into a lattice at a different temperature, until the entire mass is solid. A non-eutectic mixture thus does not have a single melting/freezing point temperature at which it changes phase, but rather a temperature at which it changes between liquid and slush (known as the liquidus) and a lower temperature at which it changes between slush and solid (the solidus).
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In thermodynamics, the chemical potential of a species is the energy that can be absorbed or released due to a change of the particle number of the given species, e.g. in a chemical reaction or phase transition. The chemical potential of a species in a mixture is defined as the rate of change of free energy of a thermodynamic system with respect to the change in the number of atoms or molecules of the species that are added to the system. Thus, it is the partial derivative of the free energy with respect to the amount of the species, all other species' concentrations in the mixture remaining constant. When both temperature and pressure are held constant, and the number of particles is expressed in moles, the chemical potential is the partial molar Gibbs free energy. At chemical equilibrium or in phase equilibrium, the total sum of the product of chemical potentials and stoichiometric coefficients is zero, as the free energy is at a minimum. In a system in diffusion equilibrium, the chemical potential of any chemical species is uniformly the same everywhere throughout the system.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
吉布斯相律是由约西亚·吉布斯于19世纪70年代提出的一个公式,说明了在特定相态下,系统的自由度跟其他变量的关系。它是相图的基本原理。 吉布斯相律的表达式为: F = C − P + n {\displaystyle F\;=\;C\;-\;P\;+\;n} 式中, F {\displaystyle F} (或作 π {\displaystyle \pi } ,Φ),表示系统的自由度, C :系统的独立组元数(number of independent component) P :相态数目 n :外界因素,多数取n=2,代表压力和温度;对于熔点极高的固体,蒸汽压的影响非常小,可取n=1。
In thermodynamics, the phase rule is a general principle governing multi-component, multi-phase systems in thermodynamic equilibrium. For a system without chemical reactions, it relates the number of freely varying intensive properties (F) to the number of components (C), the number of phases (P), and number of ways of performing work on the system (N): F = N + C − P + 1 {\displaystyle F=N+C-P+1} Examples of intensive properties that count toward F are the temperature and pressure. For simple liquids and gases, pressure-volume work is the only type of work, in which case N = 1. The rule was derived by American physicist Josiah Willard Gibbs in his landmark paper titled On the Equilibrium of Heterogeneous Substances, published in parts between 1875 and 1878.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In materials science, a dislocation is a linear crystallographic defect or irregularity within a crystal structure that contains an abrupt change in the arrangement of atoms. The movement of dislocations allows atoms to slide over each other at low stress levels and is known as glide or slip. The crystalline order is restored on either side of a glide dislocation but the atoms on one side have moved by one position. The crystalline order is not fully restored with a partial dislocation. A dislocation defines the boundary between slipped and unslipped regions of material and as a result, must either form a complete loop, intersect other dislocations or defects, or extend to the edges of the crystal. A dislocation can be characterised by the distance and direction of movement it causes to atoms which is defined by the Burgers vector. Plastic deformation of a material occurs by the creation and movement of many dislocations. The number and arrangement of dislocations influences many of the properties of materials.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In materials science, a grain boundary is the interface between two differently oriented grains, or crystallites, of the same phase in a polycrystalline material. Grain boundaries are two-dimensional defects in the crystal structure, and tend to decrease the electrical and thermal conductivity of the material. Most grain boundaries are preferred sites for the onset of corrosion and for the precipitation of new phases from the solid. They are also important to many of the mechanisms of creep. On the other hand, grain boundaries disrupt the motion of dislocations through a material, so reducing crystallite size is a common way to improve mechanical strength, as described by the Hall–Petch relationship.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In thermodynamics, nucleation is the first step in the formation of either a new thermodynamic phase or structure via self-assembly or self-organisation within a substance or mixture. Nucleation is typically defined as the process that determines how long an observer must wait before a new phase or self-organised structure appears. For example, if a volume of water is cooled (at atmospheric pressure) significantly below 0 °C, it will tend to freeze into ice. Still, volumes of water cooled only a few degrees below 0 °C often stay completely free of ice for long periods (supercooling). Under these conditions, nucleation of ice is either slow or does not occur at all. However, at lower temperatures nucleation is fast, and ice crystals appear after little or no delay. Nucleation is a common mechanism which generates first-order phase transitions, and it is the start of the process of forming a new thermodynamic phase. In contrast, new phases at continuous phase transitions start to form immediately. Nucleation is often very sensitive to impurities in the system.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
A solid solution, a term commonly used for metals, is a homogeneous mixture of two compounds in solid state and having a single crystal structure. Many examples can be found in metallurgy, geology, and solid-state chemistry. The word "solution" is used to describe the intimate mixing of components at the atomic level and distinguishes these homogeneous materials from physical mixtures of components. Two terms are mainly associated with solid solutions – solvents and solutes, depending on the relative abundance of the atomic species. The solute may incorporate into the solvent crystal lattice substitutionally, by replacing a solvent particle in the lattice, or interstitially, by fitting into the space between solvent particles. Solid solutions consist of fractional composition of one or more of its constituent ions between pure, isostructural extremes, known as end members or parents.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In chemistry, crystallography, and materials science, the coordination number, also called ligancy, of a central atom in a molecule or crystal is the number of atoms, molecules or ions bonded to it. The ion/molecule/atom surrounding the central ion/molecule/atom is called a ligand. This number is determined somewhat differently for molecules than for crystals. For molecules and polyatomic ions the coordination number of an atom is determined by simply counting the other atoms to which it is bonded (by either single or multiple bonds). For example, [Cr(NH3)2Cl2Br2]− has Cr3+ as its central cation, which has a coordination number of 6 and is described as hexacoordinate. The common coordination numbers are 4, 6 and 8.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
杠杆原理(英语:Lever rule)又称杠杆定律。是一个用来计算相图中各相的组成比例的方式。 在一个有两个不同的相,α 与 β,的溶液中,其组成成分为A,B,由杠杆原理可得该溶液α相的比例为: X α = c − b a − b {\displaystyle X_{\alpha }={\frac {c-b}{a-b}}} 其中 a为B在α相中的摩尔分率。 b为B在β相中的摩尔分率。 c为B在溶液所有相态中的总摩尔分率。 上式适用于定温的情况。
In chemistry, the lever rule is a formula used to determine the mole fraction (xi) or the mass fraction (wi) of each phase of a binary equilibrium phase diagram. It can be used to determine the fraction of liquid and solid phases for a given binary composition and temperature that is between the liquidus and solidus line.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
Cathodoluminescence is an optical and electromagnetic phenomenon in which electrons impacting on a luminescent material such as a phosphor, cause the emission of photons which may have wavelengths in the visible spectrum. A familiar example is the generation of light by an electron beam scanning the phosphor-coated inner surface of the screen of a television that uses a cathode-ray tube. Cathodoluminescence is the inverse of the photoelectric effect, in which electron emission is induced by irradiation with photons.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In structural engineering, buckling is the sudden change in shape (deformation) of a structural component under load, such as the bowing of a column under compression or the wrinkling of a plate under shear. If a structure is subjected to a gradually increasing load, when the load reaches a critical level, a member may suddenly change shape and the structure and component is said to have buckled. Euler's critical load and Johnson's parabolic formula are used to determine the buckling stress of a column. Buckling may occur even though the stresses that develop in the structure are well below those needed to cause failure in the material of which the structure is composed. Further loading may cause significant and somewhat unpredictable deformations, possibly leading to complete loss of the member's load-carrying capacity. However, if the deformations that occur after buckling do not cause the complete collapse of that member, the member will continue to support the load that caused it to buckle.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
A material is brittle if, when subjected to stress, it fractures with little elastic deformation and without significant plastic deformation. Brittle materials absorb relatively little energy prior to fracture, even those of high strength. Breaking is often accompanied by a sharp snapping sound. When used in materials science, it is generally applied to materials that fail when there is little or no plastic deformation before failure. One proof is to match the broken halves, which should fit exactly since no plastic deformation has occurred.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
Ceramic engineering is the science of creating objects from inorganic, non-metallic materials. This is done using either heat or precipitation reactions on high-purity chemical solutions at lower temperatures. The term includes the purification of raw materials, the study and production of chemical compounds, their formation into components, and the study of their structure, composition, and properties. Ceramic materials may have a crystalline or partly crystalline structure, with long-range order on atomic scale. Glass-ceramics may have an amorphous or glassy structure. They can be formed from a molten mass that solidifies on cooling or chemically synthesized at low temperatures using methods such as hydrothermal synthesis. Ceramic materials are used in the fields of materials engineering, electrical engineering, chemical engineering and mechanical engineering. Ceramics are heat resistant, so they can be used for tasks in which materials like metal and polymers are unsuitable.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In materials science, the Burgers vector, named after Dutch physicist Jan Burgers, is a vector, often denoted as b, that represents the magnitude and direction of the lattice distortion resulting from a dislocation in a crystal lattice.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
Solids can be classified according to the nature of the bonding between their atomic or molecular components. The traditional classification distinguishes four kinds of bonding: Covalent bonding, which forms network covalent solids (sometimes called simply "covalent solids") Ionic bonding, which forms ionic solids Metallic bonding, which forms metallic solids Weak inter molecular bonding, which forms molecular solids (sometimes anomalously called "covalent solids") Typical members of these classes have distinctive electron distributions, thermodynamic, electronic, and mechanical properties. In particular, the binding energies of these interactions vary widely. Bonding in solids can be of mixed or intermediate kinds, however, hence not all solids have the typical properties of a particular class, and some can be described as intermediate forms.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
Condensed matter physics is the field of physics that deals with the macroscopic and microscopic physical properties of matter, especially the solid and liquid phases, that arise from electromagnetic forces between atoms and electrons. More generally, the subject deals with condensed phases of matter: systems of many constituents with strong interactions among them. More exotic condensed phases include the superconducting phase exhibited by certain materials at extremely low cryogenic temperatures, the ferromagnetic and antiferromagnetic phases of spins on crystal lattices of atoms, the Bose–Einstein condensates found in ultracold atomic systems, and liquid crystals. Condensed matter physicists seek to understand the behavior of these phases by experiments to measure various material properties, and by applying the physical laws of quantum mechanics, electromagnetism, statistical mechanics, and other physics theories to develop mathematical models and predict the properties of very large groups of atoms.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
Combinatorial chemistry comprises chemical synthetic methods that make it possible to prepare a large number (tens to thousands or even millions) of compounds in a single process. These compound libraries can be made as mixtures, sets of individual compounds or chemical structures generated by computer software. Combinatorial chemistry can be used for the synthesis of small molecules and for peptides. Strategies that allow identification of useful components of the libraries are also part of combinatorial chemistry. The methods used in combinatorial chemistry are applied of outside chemistry as well.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In mechanics, compressive strength (or compression strength) is the capacity of a material or structure to withstand loads tending to reduce size (compression). It is opposed to tensile strength, which withstands loads tending to elongate, resisting tension (being pulled apart). In the study of strength of materials, compressive strength, tensile strength, and shear strength can be analyzed independently. Some materials fracture at their compressive strength limit; others deform irreversibly, so a given amount of deformation may be considered as the limit for compressive load. Compressive strength is a key value for design of structures. Compressive strength is often measured on a universal testing machine. Measurements of compressive strength are affected by the specific test method and conditions of measurement. Compressive strengths are usually reported in relationship to a specific technical standard.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
Compressive stresses are generated in objects when they are subjected to forces that push inward, causing the material to shorten or compress. These stresses occur when an object is squeezed or pressed from opposite directions. In everyday life, compressive stresses are common in many structures and materials. For instance, the weight of a building creates compressive stresses in its walls and foundations. Similarly, when a person stands, the bones in their legs experience compressive stresses due to the weight of the body pushing down. Compressive stresses can lead to deformation if they are strong enough, potentially causing the object to change shape or, in extreme cases, to break. The ability of a material to withstand compressive stresses without failing is known as its compressive strength. When an object is subjected to a force in a single direction (referred to as a uniaxial compression), the compressive stress is determined by dividing the applied force by the cross-sectional area of the object. Consequently, compressive stress is expressed in units of force per unit area.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
A Coulombic explosion is a condensed-matter physics process in which a molecule or crystal lattice is destroyed by the Coulombic repulsion between its constituent atoms. Coulombic explosions are a prominent technique in laser-based machining, and appear naturally in certain high-energy reactions.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
A coating is a covering that is applied to the surface of an object, or substrate. The purpose of applying the coating may be decorative, functional, or both. Coatings may be applied as liquids, gases or solids, e.g., powder coatings. Paints and lacquers are coatings that mostly have dual uses, which are protecting the substrate and being decorative, although some artists paints are only for decoration, and the paint on large industrial pipes is for identification, e.g., blue for process water, red for fire-fighting control) in addition to preventing corrosion. Along with corrosion resistance, functional coatings may also be applied to change the surface properties of the substrate, such as adhesion, wettability, or wear resistance. In other cases the coating adds a completely new property, such as a magnetic response or electrical conductivity, as in semiconductor device fabrication, where the substrate is a wafer, and forms an essential part of the finished product. A major consideration for most coating processes is controlling coating thickness.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In chemistry and materials science, impurities are chemical substances inside a confined amount of liquid, gas, or solid. They differ from the chemical composition of the material or compound. Firstly, a pure chemical should appear in at least one chemical phase and can also be characterized by its phase diagram. Secondly, a pure chemical should prove to be homogeneous (i.e., a uniform substance that has the same composition throughout the material). The perfect pure chemical will pass all attempts to separate and purify it further. Thirdly, and here we focus on the common chemical definition, it should not contain any trace of any other kind of chemical species. In reality, there are no absolutely 100% pure chemical compounds, as there is always some small amount of contamination. The levels of impurities in a material are generally defined in relative terms. Standards have been established by various organizations that attempt to define the permitted levels of various impurities in a manufactured product.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
Characterization in materials science is the broad and general process by which a material's structure and properties are probed and measured. It is a fundamental process in the field of materials science, without which no scientific understanding of engineering materials could be ascertained. The scope of the term often differs; some definitions limit the term's use to techniques which study the microscopic structure and properties of materials, while others use the term to refer to any materials analysis process including macroscopic techniques such as mechanical testing, thermal analysis and density calculation. The scale of the structures observed in materials characterization ranges from angstroms, such as in the imaging of individual atoms and chemical bonds, up to centimeters, such as in the imaging of coarse grain structures in metals. While many characterization techniques have been practiced for centuries, such as basic optical microscopy, new techniques and methodologies are constantly emerging.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
Electrical contact resistance (ECR, or simply contact resistance) is resistance to the flow of electric current caused by incomplete contact of the surfaces through which the current is flowing, and by films or oxide layers on the contacting surfaces. It occurs at electrical connections such as switches, connectors, breakers, contacts, and measurement probes. Contact resistance values are typically small (in the microohm to milliohm range). Contact resistance can cause significant voltage drops and heating in circuits with high current. Because contact resistance adds to the intrinsic resistance of the conductors, it can cause significant measurement errors when exact resistance values are needed. Contact resistance may vary with temperature. It may also vary with time (most often decreasing) in a process known as resistance creep. Electrical contact resistance is also called interface resistance, transitional resistance, or the correction term. Parasitic resistance is a more general term, of which it is usually assumed that contact resistance is a major component.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
Congruent melting occurs during melting of a compound when the composition of the liquid that forms is the same as the composition of the solid. It can be contrasted with incongruent melting. This generally happens in two-component systems. To take a general case, let A and B be the two components and AB a stable solid compound formed by their chemical combination. If we draw a phase diagram for the system, we notice that there are three solid phases, namely A, B and compound AB. Accordingly, there will be three fusion or freezing point curves AC, BE and CDE for the three solid phases. In the phase diagram, we can notice that the top point D of the phase diagram is the congruent melting point of the compound AB because the solid and liquid phases now have the same composition. Evidently, at this temperature, the two-component system has become a one-component system because both solid and liquid phases contains only the compound AB. Congruent melting point represents a definite temperature just like the melting points of pure components.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In chemistry, chemical stability is the thermodynamic stability of a chemical system, in particular a chemical compound or a polymer. Colloquially, it may instead refer to kinetic persistence, the shelf-life of a metastable substance or system; that is, the timescale over which it begins to degrade. Thermodynamic stability occurs when a system is in its lowest energy state, or in chemical equilibrium with its environment. This may be a dynamic equilibrium in which individual atoms or molecules change form, but their overall number in a particular form is conserved. This type of chemical thermodynamic equilibrium will persist indefinitely unless the system is changed. Chemical systems might undergo changes in the phase of matter or a set of chemical reactions. State A is said to be more thermodynamically stable than state B if the Gibbs free energy of the change from A to B is positive.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
Ion implantation is a low-temperature process by which ions of one element are accelerated into a solid target, thereby changing the target's physical, chemical, or electrical properties. Ion implantation is used in semiconductor device fabrication and in metal finishing, as well as in materials science research. The ions can alter the elemental composition of the target (if the ions differ in composition from the target) if they stop and remain in the target. Ion implantation also causes chemical and physical changes when the ions impinge on the target at high energy. The crystal structure of the target can be damaged or even destroyed by the energetic collision cascades, and ions of sufficiently high energy (tens of MeV) can cause nuclear transmutation.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In continuum mechanics, the infinitesimal strain theory is a mathematical approach to the description of the deformation of a solid body in which the displacements of the material particles are assumed to be much smaller (indeed, infinitesimally smaller) than any relevant dimension of the body; so that its geometry and the constitutive properties of the material (such as density and stiffness) at each point of space can be assumed to be unchanged by the deformation. With this assumption, the equations of continuum mechanics are considerably simplified. This approach may also be called small deformation theory, small displacement theory, or small displacement-gradient theory. It is contrasted with the finite strain theory where the opposite assumption is made. The infinitesimal strain theory has wide applications in engineering. Stress analysis, for example, tries to predict the behavior of structures built from relatively stiff elastic materials, such as concrete and steel. Such analysis can be used to minimize a structure design's deformation under typical loads.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。