Slip bands or stretcher-strain marks are localized bands of plastic deformation in metals experiencing stresses. Formation of slip bands indicates a concentrated unidirectional slip on certain planes causing a stress concentration. Typically, slip bands induce surface steps (e.g., roughness due persistent slip bands during fatigue) and a stress concentration which can be a crack nucleation site. Slip bands extend until impinged by a boundary, and the generated stress from dislocations pile-up against that boundary will either stop or transmit the operating slip depending on its (mis)orientation. Formation of slip bands under cyclic conditions is addressed as persistent slip bands (PSBs) where formation under monotonic condition is addressed as dislocation planar arrays (or simply slip-bands, see Slip bands in the absence of cyclic loading section).
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
A banked turn (or banking turn) is a turn or change of direction in which the vehicle banks or inclines, usually towards the inside of the turn. For a road or railroad this is usually due to the roadbed having a transverse down-slope towards the inside of the curve. The bank angle is the angle at which the vehicle is inclined about its longitudinal axis with respect to the horizontal.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
A gravity train is a theoretical means of transportation for purposes of commuting between two points on the surface of a sphere, by following a straight tunnel connecting the two points through the interior of the sphere. In a large body such as a planet, this train could be left to accelerate using just the force of gravity, since during the first half of the trip (from the point of departure until the middle), the downward pull towards the center of gravity would pull it towards the destination. During the second half of the trip, the acceleration would be in the opposite direction relative to the trajectory, but, ignoring the effects of friction, the momentum acquired during the first half of the trajectory would equal this deceleration, and as a result, the train's speed would reach zero at approximately the moment the train reached its destination.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In structural engineering, Johnson's parabolic formula is an empirically based equation for calculating the critical buckling stress of a column. The formula was developed by John Butler Johnson in 1893 as an alternative to Euler's critical load formula under low slenderness ratio (the ratio of radius of gyration to effective length) conditions. The equation interpolates between the yield stress of the material and the critical buckling stress given by Euler's formula relating the slenderness ratio to the stress required to buckle a column. Buckling refers to a mode of failure in which the structure loses stability. It is caused by a lack of structural stiffness. Placing a load on a long slender bar may cause a buckling failure before the specimen can fail by compression.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
In physics and mechanics, mass distribution is the spatial distribution of mass within a solid body. In principle, it is relevant also for gases or liquids, but on Earth their mass distribution is almost homogeneous.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
Pressure drop (often abbreviated as "dP" or "ΔP") is defined as the difference in total pressure between two points of a fluid carrying network. A pressure drop occurs when frictional forces, caused by the resistance to flow, act on a fluid as it flows through a conduit (such as a channel, pipe, or tube). This friction converts some of the fluid's hydraulic energy to thermal energy (i.e., internal energy). Since the thermal energy cannot be converted back to hydraulic energy, the fluid experiences a drop in pressure, as is required by conservation of energy. The main determinants of resistance to fluid flow are fluid velocity through the pipe and fluid viscosity. Pressure drop increases proportionally to the frictional shear forces within the piping network.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In physics and engineering, the quality factor or Q factor is a dimensionless parameter that describes how underdamped an oscillator or resonator is. Resonators with high quality factors have low damping, so that they ring or vibrate longer. For example, a pendulum suspended from a precision bearing, oscillating in air, has a high Q, while a pendulum immersed in oil has a low Q. There are two definitions of Q that give numerically similar, but not identical, results. The more general definition is the ratio of the initial energy stored in the resonator to the energy lost in one radian of the cycle of oscillation. An alternative definition of Q factor, more applicable to high Q oscillators, is the ratio of a resonator's centre frequency to its bandwidth when subject to an oscillating driving force.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
兰贝格-奥斯古德方程是固体力学中描述材料在其屈服点附近的应力-应变关系(应力-应变曲线)的一个理论模型,其形式为: ϵ = σ E + K ( σ E ) n {\displaystyle \epsilon ={\frac {\sigma }{E}}+K({\frac {\sigma }{E}})^{n}} , 其中 ϵ {\displaystyle \epsilon } 表示总应变,即包含弹性和塑性应变. σ {\displaystyle \sigma } 表示总应力. E {\displaystyle E} 为材料的杨氏模量 K {\displaystyle K} 和 n {\displaystyle n} 是与材料类型相关的常数。
The Ramberg–Osgood equation was created to describe the nonlinear relationship between stress and strain—that is, the stress–strain curve—in materials near their yield points. It is especially applicable to metals that harden with plastic deformation (see work hardening), showing a smooth elastic-plastic transition. As it is a phenomenological model, checking the fit of the model with actual experimental data for the particular material of interest is essential.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
Rubber elasticity is the ability of solid rubber to be stretched up to a factor of 10 from its original length, and return to close to its original length upon release. This process can be repeated many times with no apparent degradation to the rubber. Rubber, like all materials, consists of molecules. Rubber's elasticity is produced by molecular processes that occur due to its molecular structure. Rubber's molecules are polymers, or large, chain-like molecules. Polymers are produced by a process called polymerization. This process builds polymers up by sequentially adding short molecular backbone units to the chain through chemical reactions. A rubber polymer follows a random winding path in three dimensions, intermingling with many other rubber polymers.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
A column can buckle due to its own weight with no other direct forces acting on it, in a failure mode called self-buckling. In conventional column buckling problems, the self-weight is often neglected since it is assumed to be small when compared to the applied axial loads. However, when the weight of the column is significant compared to its buckling strength, it is important to take self-buckling into account. Elastic buckling of a "heavy" column i.e., column buckling under its own weight, was first investigated by Greenhill in 1881.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
Vis viva (from the Latin for "living force") is a historical term used to describe a quantity similar to kinetic energy in an early formulation of the principle of conservation of energy.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
A material is brittle if, when subjected to stress, it fractures with little elastic deformation and without significant plastic deformation. Brittle materials absorb relatively little energy prior to fracture, even those of high strength. Breaking is often accompanied by a sharp snapping sound. When used in materials science, it is generally applied to materials that fail when there is little or no plastic deformation before failure. One proof is to match the broken halves, which should fit exactly since no plastic deformation has occurred.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
In thermofluids dynamics, the bulk temperature, or the average bulk temperature in the thermal fluid, is a convenient reference point for evaluating properties related to convective heat transfer, particularly in applications related to flow in pipes and ducts. The concept of the bulk temperature is that adiabatic mixing of the fluid from a given cross section of the duct will result in some equilibrium temperature that accurately reflects the average temperature of the moving fluid, more so than a simple average like the film temperature.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
A dilatant (, ) (also termed shear thickening) material is one in which viscosity increases with the rate of shear strain. Such a shear thickening fluid, also known by the initialism STF, is an example of a non-Newtonian fluid. This behaviour is usually not observed in pure materials, but can occur in suspensions. A dilatant is a non-Newtonian fluid where the shear viscosity increases with applied shear stress. This behavior is only one type of deviation from Newton's law of viscosity, and it is controlled by such factors as particle size, shape, and distribution. The properties of these suspensions depend on Hamaker theory and Van der Waals forces and can be stabilized electrostatically or sterically. Shear thickening behavior occurs when a colloidal suspension transitions from a stable state to a state of flocculation.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
Fluid films, such as soap films, are commonly encountered in everyday experience. A soap film can be formed by dipping a closed contour wire into a soapy solution as in the figure on the right. Alternatively, a catenoid can be formed by dipping two rings in the soapy solution and subsequently separating them while maintaining the coaxial configuration. Stationary fluid films form surfaces of minimal surface area, leading to the Plateau problem. On the other hand, fluid films display rich dynamic properties. They can undergo enormous deformations away from the equilibrium configuration. Furthermore, they display several orders of magnitude variations in thickness from nanometers to millimeters. Thus, a fluid film can simultaneously display nanoscale and macroscale phenomena.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
弹性张量是描述线弹性材料中的应力-应变关系的四阶张量。其他名称还有弹性模量张量和刚度张量。常见的符号包括 C {\displaystyle \mathbf {C} } 和 Y {\displaystyle \mathbf {Y} } 。
The elasticity tensor is a fourth-rank tensor describing the stress-strain relation in a linear elastic material. Other names are elastic modulus tensor and stiffness tensor. Common symbols include C {\displaystyle \mathbf {C} } and Y {\displaystyle \mathbf {Y} } .
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
In physics, physical chemistry, and engineering, fluid dynamics is a subdiscipline of fluid mechanics that describes the flow of fluids – liquids and gases. It has several subdisciplines, including aerodynamics (the study of air and other gases in motion) and hydrodynamics (the study of water and other liquids in motion). Fluid dynamics has a wide range of applications, including calculating forces and moments on aircraft, determining the mass flow rate of petroleum through pipelines, predicting weather patterns, understanding nebulae in interstellar space, understanding large scale geophysical flows involving oceans/atmosphere and modelling fission weapon detonation. Fluid dynamics offers a systematic structure—which underlies these practical disciplines—that embraces empirical and semi-empirical laws derived from flow measurement and used to solve practical problems.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
The impulse excitation technique (IET) is a non-destructive material characterization technique to determine the elastic properties and internal friction of a material of interest. It measures the resonant frequencies in order to calculate the Young's modulus, shear modulus, Poisson's ratio and internal friction of predefined shapes like rectangular bars, cylindrical rods and disc shaped samples. The measurements can be performed at room temperature or at elevated temperatures (up to 1700 °C) under different atmospheres. The measurement principle is based on tapping the sample with a small projectile and recording the induced vibration signal with a piezoelectric sensor, microphone, laser vibrometer or accelerometer. To optimize the results a microphone or a laser vibrometer can be used as there is no contact between the test-piece and the sensor.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
单向波动方程是描述沿矢量波速定义的方向传播的一个波的一阶偏微分方程。它与二阶双向波动方程形成对比,二阶双向波动方程描述了由相反方向的两个波叠加产生的驻波场(使用平方标量波速度)。在一维情况下,它也称为传输方程,它允许计算波传播,而无需求解二阶微分方程的数学复杂性。由于在过去的几十年中没有找到 3D 单向波动方程的通用解,因此许多基于 1D 单向波动方程的近似方法被用于 3D 地震和其他地球物理计算,另请参见第 § 三维情况一节。
A one-way wave equation is a first-order partial differential equation describing one wave traveling in a direction defined by the vector wave velocity. It contrasts with the second-order two-way wave equation describing a standing wavefield resulting from superposition of two waves in opposite directions (using the squared scalar wave velocity). In the one-dimensional case it is also known as a transport equation, and it allows wave propagation to be calculated without the mathematical complication of solving a 2nd order differential equation. Due to the fact that in the last decades no general solution to the 3D one-way wave equation could be found, numerous approximation methods based on the 1D one-way wave equation are used for 3D seismic and other geophysical calculations, see also the section § Three-dimensional case.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
A seismic metamaterial is a metamaterial that is designed to counteract the adverse effects of seismic waves on artificial structures. Current designs of seismic metamaterials use configurations of boreholes, trees, or proposed underground resonators to act as a large-scale material. Experiments have observed both reflections and bandgap attenuation from artificially induced seismic waves. These are the first experiments to verify that seismic metamaterials can be measured for frequencies below 100 Hz, where damage from Rayleigh waves is the most harmful to artificial structures.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
张量(英语:Tensor)在数学中是一个代数对象,描述了与矢量空间相关的代数对象集之间的多重线性映射。张量可以作为不同的对象之间的映射,例如矢量、标量以及其他张量。张量有很多种类型,包括标量和矢量、对偶矢量、矢量空间之间的多重线性映射,甚至还有一些运算,例如点积。张量的定义独立于任何基,尽管它们通常由与特定坐标系相关的基中的分量来表示;这些分量形成一个数组,可以将其视为高维矩阵。 n {\displaystyle n} 维空间上的 r {\displaystyle r} 阶张量有 n r {\displaystyle n^{r}} 个分量, r {\displaystyle r} 也称为该张量的秩(与矩阵的秩和阶均无关系)。
In mathematics, a tensor is an algebraic object that describes a multilinear relationship between sets of algebraic objects associated with a vector space. Tensors may map between different objects such as vectors, scalars, and even other tensors. There are many types of tensors, including scalars and vectors (which are the simplest tensors), dual vectors, multilinear maps between vector spaces, and even some operations such as the dot product. Tensors are defined independent of any basis, although they are often referred to by their components in a basis related to a particular coordinate system; those components form an array, which can be thought of as a high-dimensional matrix.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。
The theory of tides is the application of continuum mechanics to interpret and predict the tidal deformations of planetary and satellite bodies and their atmospheres and oceans (especially Earth's oceans) under the gravitational loading of another astronomical body or bodies (especially the Moon and Sun).
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
A transversely isotropic (also known as polar anisotropic) material is one with physical properties that are symmetric about an axis that is normal to a plane of isotropy. This transverse plane has infinite planes of symmetry and thus, within this plane, the material properties are the same in all directions. In geophysics, vertically transverse isotropy (VTI) is also known as radial anisotropy. This type of material exhibits hexagonal symmetry (though technically this ceases to be true for tensors of rank 6 and higher), so the number of independent constants in the (fourth-rank) elasticity tensor are reduced to 5 (from a total of 21 independent constants in the case of a fully anisotropic solid). The (second-rank) tensors of electrical resistivity, permeability, etc. have two independent constants.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
In fluid mechanics, apparent viscosity (sometimes denoted η) is the shear stress applied to a fluid divided by the shear rate: η = τ γ ˙ {\displaystyle \eta ={\frac {\tau }{\dot {\gamma }}}} For a Newtonian fluid, the apparent viscosity is constant, and equal to the Newtonian viscosity of the fluid, but for non-Newtonian fluids, the apparent viscosity depends on the shear rate. Apparent viscosity has the SI derived unit Pa·s (Pascal-second), but the centipoise is frequently used in practice: (1 mPa·s = 1 cP).
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
Conductor gallop is the high-amplitude, low-frequency oscillation of overhead power lines due to wind. The movement of the wires occurs most commonly in the vertical plane, although horizontal or rotational motion is also possible. The natural frequency mode tends to be around 1 Hz, leading the often graceful periodic motion to also be known as conductor dancing. The oscillations can exhibit amplitudes in excess of a metre, and the displacement is sometimes sufficient for the phase conductors to infringe operating clearances (coming too close to other objects), and causing flashover. The forceful motion also adds significantly to the loading stress on insulators and electricity pylons, raising the risk of mechanical failure of either.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
Ground vibration boom is a phenomenon of very large increase in ground vibrations generated by high-speed railway trains travelling at speeds higher than the velocity of Rayleigh surface waves in the supporting ground.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
Ground vibrations is a technical term that is being used to describe mostly man-made vibrations of the ground, in contrast to natural vibrations of the Earth studied by seismology. For example, vibrations caused by explosions, construction works, railway and road transport, etc. - all belong to ground vibrations.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
The Bigoni–Piccolroaz yield criterion is a yielding model, based on a phenomenological approach, capable of describing the mechanical behavior of a broad class of pressure-sensitive granular materials such as soil, concrete, porous metals and ceramics.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。
A subfield of fluid statics, aerostatics is the study of gases that are not in motion with respect to the coordinate system in which they are considered. The corresponding study of gases in motion is called aerodynamics. Aerostatics studies density allocation, especially in air. One of the applications of this is the barometric formula. An aerostat is a lighter than air craft, such as an airship or balloon, which uses the principles of aerostatics to float.
来源、授权与使用说明
维基百科条目作者 · 获取于 2026-10-04 · CC BY-SA 4.0。简介经过纯文本提取与截取;两个语言版本的内容侧重可能不同。用于概念速查,不替代标准原文。 本条中文为英文百科简介的机器辅助翻译,请结合英文原文核对专业术语。